Thingiverse

Onevan blower venturi nozzle

by Droite

0 Downloads

1 Likes

0 Makes

Fits onevan 2000W - 200m/s
I used a 0.28mm layer.
15% infill.
Supports are required.
Printing time using PLA on Anycubic Kobra 2 Pro ~ 3.5 hours

Blower gisam onevan

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

0.28mm layers

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Min. bed size

50 mm (Small)

Layer height

0.28 mm

Est. print time

3.5 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Onevan blower venturi nozzle?

Any FDM printer should handle Onevan blower venturi nozzle just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

How long does it take to print Onevan blower venturi nozzle?

According to the design notes, Onevan blower venturi nozzle takes approximately 3.5 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Onevan blower venturi nozzle available in?

Onevan blower venturi nozzle is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Onevan blower venturi nozzle free to download?

Yes, Onevan blower venturi nozzle is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Onevan blower venturi nozzle

Similar Models

Add to Collection