oni hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Red At layer #17 (1.44mm) swap to Yellow At layer #29 (2.4mm) swap to Jade White for the rest.