Open Barbell 7ft Olympic

###Order the following:
* (QTY 1) 7ft cold drawn steel bar 1-1/8in diameter from local metal supplier
* (QTY 1) 3ft Low-Carbon Steel Round Tube, 0.12in Wall Thickness, 2in OD McMaster P/N 7767T54
* (QTY 4) Clamping Shaft Collar McMaster P/N 6435K19

###Directions:
1. Cut the 3ft 2" tube into 16" sections.
2. Clean the metal with degreaser, and sand with 220 grit sandpaper to remove sharps.
3. 3D print the bushings (QTY 2) inside, (QTY 2) outside. PETG or ABS are a good materials. 30% infill, 0.2mm layer height.
4. Assemble and use a 3/16 allen wrench to tighten shaft collars.
5. Wrap sports tape around the bar to increase grip.

Follow us on Instagram @cavemanweights