Thingiverse
open pliers wall mount
15
Téléchargements
36
Likes
0
Makes
This Design is part of the [OpenHardwareSociety´s tool wall.](https://www.thingiverse.com/openhardwaresociety/collections/34762456/things "OpenHardwareSociety´s tool wall")
** "open pliers wall mount" **
This is a parametric open source hardware plier wall mount. It can be used to generate a variety of plier- and rectangular cross sectioned tool mounts. With standard settings generates holders for 3mm screws. Feel free to evolve it.
PLA and other non soft filaments should work fine. 0,1mm layer height. For heavy use consider 100% infill, but my trials with 30% gyroid infill and wall-line-count=3 seem to work fine. No supports needed.
you can get OpenSCAD at: https://openscad.org/
It is based on my [Knipex pliers compatible wall mount.](https://www.thingiverse.com/thing:5489220 "Knipex pliers compatible wall mount") remade in OpenSCAD and optimized for less filament usage and only one screw is needed.
included STLs for following pliers:
Knipex 44 11 J1 (15,9mm x 8,3mm
** "open pliers wall mount" **
This is a parametric open source hardware plier wall mount. It can be used to generate a variety of plier- and rectangular cross sectioned tool mounts. With standard settings generates holders for 3mm screws. Feel free to evolve it.
PLA and other non soft filaments should work fine. 0,1mm layer height. For heavy use consider 100% infill, but my trials with 30% gyroid infill and wall-line-count=3 seem to work fine. No supports needed.
you can get OpenSCAD at: https://openscad.org/
It is based on my [Knipex pliers compatible wall mount.](https://www.thingiverse.com/thing:5489220 "Knipex pliers compatible wall mount") remade in OpenSCAD and optimized for less filament usage and only one screw is needed.
included STLs for following pliers:
Knipex 44 11 J1 (15,9mm x 8,3mm
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !