Slicer Discord
Open Wobble Switch – 3D-Druckmodell von Thingiverse Thingiverse

Open Wobble Switch

20 Downloads
12 Likes
0 Makes
Zum Modell
The Open Wobble Switch is a cost effective, open source assistive switch similar to commercially available Wobble Switches. The switch is activated by applying force to and moving a wand in any direction. The switch can be activated by various body parts including the limbs and head. It provides a momentary closed contact that can be used to activate various assistive devices.

The switch provides a momentary closure to a 3.5 mm jack. The switch can be plugged directly into a suitable assistive device and can be used to access a computer or smartphone using a suitable switch interface. The switch can be plugged directly into the Xbox Adaptive Controller.

The switch is based on a commercially available limit switch and requires some additional components to assemble.

A complete part list and instruction guide can be found at the MMC project page:
https://www.makersmakingchange.com/project/open-wobble-switch/

or the GitHub Repository:
https://github.com/makersmakingchange/Op
Quelle
Thingiverse
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

2 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen