Thingiverse

OpenAstroTracker - Tripod Legs AddOn

by deltaclo

38 Downloads

35 Likes

0 Makes

Here is my first contribution to the OAT project.
I was tired of setting a table for the OAT so I designed legs.

Part list:
- 9 500mm 2020 aluminium profile
- 54 M4x12 screws and T-nuts
- 3 M5 screws and T-slide
- 6 M5x80mm threaded rod and 12 M5 nuts
- 2 M6 bolt and butterfly nuts
- 1 720x500x15mm plywood plank (use the template to cut the final shape)

Printed part list:
- 1 Tripod_mont_right_2020base.stl
- 1 Tripod_mont_rear_2020base.stl
- 1 Tripod_mont_left_2020base.stl
- 3 top.stl
- 6 slide.stl
- 3 mid out.stl
- 3 mid in.stl
- 3 mid plate.stl

addon Astro astrophotography DSLR photography tracker addon Astro astrophotography DSLR photography tracker

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Why?

very large print

Single piece Hardware needed May need scaling or splitting

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 3/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

PLA, Wood PLA

Min. bed size

720 mm (Extra large)

Post-processing

Hardware

Software

Cura, PrusaSlicer, or similar

No ratings yet

No comments yet – be the first!

OpenAstroTracker - Tripod Legs AddOn

Add to Collection