Openframe1 Full Case

Same case just not spread out in as many prints for those who have larger print beds.

No supports should be needed

I've added screenshots from jlcpcb.com with recommended materials and all of the .stls needed to make a full case. Keycap .stls have been uploaded with permission from the goat himself (Bjart). Check out his store at https://ko-fi.com/ranalabs .

M3 Heatset inserts: https://cnckitchen.store/products/gewindeeinsatz-threaded-insert-m3-standard-100-stk-pcs
M3 Bolts: https://www.mcmaster.com/94500A262/
5mm + 3mm M3 threaded Inserts for resin case: https://www.amazon.com/uxcell-Male-Female-Motherboard-Standoff-Quadcopter/dp/B08F23855P/

TLDR:
V2:
-- Use Full_Body_nosupport.stl for FDM printing.
-- Use Openframe1_Full_Case.stl for Resin printing.
V3:
-- Optimized for Resin. Should print fine FDM as well
v4:
-- Resin and FDM print. Resin uses some threaded hex inserts. FDM uses some heatset inserts
-- Swapped to M3 screws
-- Thicker backplate to reduce flex