Thingiverse
Opening Pick
door jq910
713
Downloads
661
Likes
2
Makes
Also available at: https://www.printables.com/model/557752-opening-pick
An opening pick similar to the iFixit one for prying open electronics and slicing apart adhesives.
There are 2 versions: the 0.6mm version is more flexible and closer to the original iFixit opening pick's 0.5mm thickness while the 1.2mm version more rigid and durable
Print at 0.08mm layer height (or lowest possible)
Wait for the pick to cool down before removing it from the build plate to avoid deforming the thin plastic.
Warranty void if used as guitar pick
An opening pick similar to the iFixit one for prying open electronics and slicing apart adhesives.
There are 2 versions: the 0.6mm version is more flexible and closer to the original iFixit opening pick's 0.5mm thickness while the 1.2mm version more rigid and durable
Print at 0.08mm layer height (or lowest possible)
Wait for the pick to cool down before removing it from the build plate to avoid deforming the thin plastic.
Warranty void if used as guitar pick
jq910 publiceert ook op
43 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
