Thingiverse
OpenLock Magnetic Connection System V3
por SingularityGames
612
Descargas
335
Likes
2
Makes
This is a magnetic connection system for OpenLock terrain. It is glue free, polarity independent and can make sturdy structures that are quick to put together and take apart.
You can learn more about OpenLock at: https://www.printablescenery.com/
Join me on patreon to get access to all of my designs (including the original fusion 360 files) and make design requests: https://www.patreon.com/singularitygames
Send commission requests to [email protected]
The clips allow the magnet to freely rotate, which means that any magnetic clip can connect to any other since the magnets will move into the correct polarity. As they require no glue, the magnets can be easily reused for other projects. The clips are designed to be able to fit 3 side-by-side.
Version 3 of the clips are updated for easier printing and improved flexibility. They are designed and tested to be printed on an FDM printer using a 0.4mm nozzle and 0.2mm layer height. There is limited tolerance between the cli
You can learn more about OpenLock at: https://www.printablescenery.com/
Join me on patreon to get access to all of my designs (including the original fusion 360 files) and make design requests: https://www.patreon.com/singularitygames
Send commission requests to [email protected]
The clips allow the magnet to freely rotate, which means that any magnetic clip can connect to any other since the magnets will move into the correct polarity. As they require no glue, the magnets can be easily reused for other projects. The clips are designed to be able to fit 3 side-by-side.
Version 3 of the clips are updated for easier printing and improved flexibility. They are designed and tested to be printed on an FDM printer using a 0.4mm nozzle and 0.2mm layer height. There is limited tolerance between the cli
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!