OpenRack 1U TP-Link 5-Port Switch Insert

This is an 1U insert for the OpenRack insert system that I made for a TP-Link TL-SG105MPE five-port switch. It's possible this works with other 5 port TP-Link switches as well though. I use my rack sideways so this was made with very tight tolerances that it can't slide left/right or up/down. It holds in place pretty well just sliding in, but if you remove the front face screws you can screw some longer ones in so it's impossible to slide forward/back as well. I replaced the front screws with the m3 6mm socket head hex bolts here: https://www.amazon.com/dp/B0D144ZZPC the bolt's head diameter is about 5.4mm so that's about how big the hole is for the screws. I've included the step file if you need to adjust some sizes and want to use different screws. I've created a model for holding the switch's power brick as well: https://makerworld.com/en/models/1531117-10-inch-tp-link-tl-sg105mpe-power-brick-holder