Optimal Heatbed Level System (OHLS)

This Thing is for an optimized bed leveling with thermal barrier.


**Description**
The Peek cylinder serves as a thermal barrier to prevent the heat from the heat from the heating bed into the printing table. Because the two screws are screwed into the cylinder, they do not have a direct transition to one another, and the heat is hardly transmitted through the pekk because it has a very poor thermal conductivity. At the same time, however, the peek is very heat-resistant and the temperatures of the heating bed can be very well tolerated.
The silicone damper is used to adjust the pressure bed and, in combination with the Peek part, provides a more stable structure than would be the case with a spring. In addition, the silicone does not have any direct contact with the heating bed due to the peek, which is why it is not so quickly degraded by the influence of the temperature and becomes porous.
The screws can be selected according to the circumstances. Why this system can be used