Optimus Prime Hueforge

Project: Transforms_3_v3.hfpPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 190x250mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.2mm Filaments Used: 1:PLA Elegoo Black Transmission Distance: 0.3 2:PLA Elegoo Dark Bule Transmission Distance: 2.8 3:PLA Elegoo True / Ruby Red Transmission Distance: 3.6 4:PLA Elegoo Light Blue Transmission Distance: 2.7 5:PLA Elegoo White Transmission Distance: 5.1 6:PLA Elegoo Grey Transmission Distance: 1.8 7:PLA Elegoo Yellow Transmission Distance: 5.1 8:PLA BambuLab Basic BambuLab Green Transmission Distance: 0.9This print uses 8 unique filaments !!!! It is possible to print this hueforge with a single AMS unit just organize your filament swap in away that makes the most sense to you !!!!! Swap Instructions: Start with Black At layer #12 (0.6mm) swap to Dark Bule At layer #13 (0.64mm) swap to True / Ruby Red A