Optional Spinner with Spin-Mark

by konchan77 · Engineering

12 Downloads

13 Likes

0 Makes

Go to Model

Spinner with Spin-Mark

This is an optional spinner with Spin-Mark for "Jet Engine, Geared Turbofan (GTF) (thing: 2462343)".
https://www.thingiverse.com/thing:2462343

Printer setting (Recommendation) (used PLA):
- Spinner body (Fan-Spinner201wsCW.stl) = infill: 100%, Layer Height: 0.2mm, No support
- Spin Mark (Fan-Spinner202x095CW.stl) = infill: 100%, Layer Height: 0.1mm, No support

Post printing:
- Gluing is necessary to keep "Mark" in position.

This method is still under consideration.