Thingiverse
Optiplex 3060 screen mount
door Sinfinity
1
Downloads
5
Likes
0
Makes
Two different files, one with support and one without.
Reamended infill is 40% but i have done it with 20% and it came out very good.
When assembling you will need 3x longer screws, 20-30mm threads.
You will also need a short M6 to secure the computer to the mount.
if you use the file with support you will need thread insert for mounting the computer. If you dont have any thread inserts you can easily drill the hole and use regular screw/nut
Enjoy!
Reamended infill is 40% but i have done it with 20% and it came out very good.
When assembling you will need 3x longer screws, 20-30mm threads.
You will also need a short M6 to secure the computer to the mount.
if you use the file with support you will need thread insert for mounting the computer. If you dont have any thread inserts you can easily drill the hole and use regular screw/nut
Enjoy!
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!