Slicer Discord
OrangeRX JR Module antenna relocation – Modello 3D stampabile da Thingiverse Thingiverse

OrangeRX JR Module antenna relocation

di dmyers7
125 Download
73 Likes
9 Makes
Vai al Modello
2-17-2015 Quick update note: Per user Porksmash, it looks like HobbyKing has updated their orange Tx module to eliminate the micro coax as part of the internal design and thereby killing this hack. That said, you could buy a 70mm micro coax and matching 2.4Ghz Antenna from Aloft Hobbies .com and solder the micro coax directly to the board (signal and shield). You will have to remove the current connector to try and maintain proper signal characteristics. If you do this, !! make sure you range test !! Use hot glue to lock the coax in place once you have a working and range tested system. There is the possibility that if not done right the transmitter module can burnout mid flight and you will loose control of your aircraft. (i.e. you need to range check before and after the mod to insure the transmitted signal is as strong after the mod.) Personal at this point I would move onto the Spek Module hack and leave this one behind. Since I do not have possession of a new module I ca
Fonte
Thingiverse
Cosa serve per stampare: Intermedio Bassa affidabilità
Pezzo unico
Supporti 1/3
Assemblaggio 0/3
Impostazioni 1/3
Dimensioni piano 0/3
Post-lavorazione 1/3
Stampante
FDM / FFF
Formato file
STL
Materiale
PLA
Post-elaborazione
Incollaggio
Software
Cura, PrusaSlicer o simile
Ancora nessuna valutazione
Ancora nessun commento – sii il primo!

Modelli simili

6 Suggerimenti
Feed Blog Slicer Calcolatore Ricerca per immagine Invia Contatto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Aggiungi alla collezione