Thingiverse
Orbiter and Mosquito toolhead for Hypercube Evolution
por Kotvic
75
Descargas
41
Likes
0
Makes
Hello,
I have made this compact and relatively leightweight toolhead for my Hypercube Evolution printer.
Complete toolhead with all parts included weights only 245g. This is in my opinion good value for direct drive setup.
Needed hardware and parts:
=======================
* 1x Orbiter Extruder v1
* 1x Mosquito or NF-Crazy hotend with thermostor and heater of your choice
* 1x LJ-8-A3-2-Z/BX-5V or P.I.N.D.A probe
* 1x Optical endstop
* 1x 5015 blower fan (Sunon Maglev recommended)
* 1x 4010 fan (Noctua NF-A4x10 FLX)
* 10x M3x5x5 heat set insert (SL type recommended)
* 5x M3x8 Hex socket screw (DIN 912 or ISO 7380 recommended)
* 2x M3x12 Hex socket screw (DIN 912 or ISO 7380 recommended)
* 2x M3x20 Hex socket screw (DIN 912 or ISO 7380 recommended)
* 2x M2.5x5 Hex socket screw (Should be part of Mosquito hotned package)
Assembly instructions:
==================
1. Print both plastic parts and insert 10 heat set inserts into Toolhead body
2. Mount endstop switch
I have made this compact and relatively leightweight toolhead for my Hypercube Evolution printer.
Complete toolhead with all parts included weights only 245g. This is in my opinion good value for direct drive setup.
Needed hardware and parts:
=======================
* 1x Orbiter Extruder v1
* 1x Mosquito or NF-Crazy hotend with thermostor and heater of your choice
* 1x LJ-8-A3-2-Z/BX-5V or P.I.N.D.A probe
* 1x Optical endstop
* 1x 5015 blower fan (Sunon Maglev recommended)
* 1x 4010 fan (Noctua NF-A4x10 FLX)
* 10x M3x5x5 heat set insert (SL type recommended)
* 5x M3x8 Hex socket screw (DIN 912 or ISO 7380 recommended)
* 2x M3x12 Hex socket screw (DIN 912 or ISO 7380 recommended)
* 2x M3x20 Hex socket screw (DIN 912 or ISO 7380 recommended)
* 2x M2.5x5 Hex socket screw (Should be part of Mosquito hotned package)
Assembly instructions:
==================
1. Print both plastic parts and insert 10 heat set inserts into Toolhead body
2. Mount endstop switch
Kotvic también publica en
15 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!