Thingiverse
ORCA V2 VTOL
door QuasiFlight
62
Downloads
67
Likes
0
Makes
The listed parts are for converting 3d printed ORCA V2 FPV wing (https://craycle.com/product/fpvorca-stl/ or https://cults3d.com/en/3d-model/various/craycle-fpv-orca-3d-printable-rc-fpv-plane) into VTOL. I ordered ORCA V2 through cults3d.
Hover test video: https://www.youtube.com/watch?v=QdFEp42QF2g
Maiden flight video of QHover to FBWA: https://www.youtube.com/watch?v=2w3EFrIKp0U
Tail boom holder is designed based on the motor mount of ORCA V2. The rest VTOL parts are modified from Heewing T1 Ranger vtol parts by Marc Appel (https://www.thingiverse.com/thing:5348919)
3d printing material PLA, 0.4 mm nozzle, layer height 0.2 mm, wall thickness 0.4 mm (one layer), extruder temperature 205, bed temperature 60, printing speed 45mm/s, 20% infill for all front tilt parts; 50% infill for tail parts.
Before gluing fuselage and wing parts together, I used hot knife cutting holes on the wing and fuselage so that motor and tilt servo wires (both extended) could reach fuselage.
Hover test video: https://www.youtube.com/watch?v=QdFEp42QF2g
Maiden flight video of QHover to FBWA: https://www.youtube.com/watch?v=2w3EFrIKp0U
Tail boom holder is designed based on the motor mount of ORCA V2. The rest VTOL parts are modified from Heewing T1 Ranger vtol parts by Marc Appel (https://www.thingiverse.com/thing:5348919)
3d printing material PLA, 0.4 mm nozzle, layer height 0.2 mm, wall thickness 0.4 mm (one layer), extruder temperature 205, bed temperature 60, printing speed 45mm/s, 20% infill for all front tilt parts; 50% infill for tail parts.
Before gluing fuselage and wing parts together, I used hot knife cutting holes on the wing and fuselage so that motor and tilt servo wires (both extended) could reach fuselage.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!