Slicer Discord
Orico M4 mac mini Hub Mount – 3D-Druckmodell von MakerWorld MakerWorld
Electronics

Orico M4 mac mini Hub Mount

49 Downloads
16 Likes
23 Makes
Zum Modell
Orico M4 Macmini 固定架 1.因為拔插USB就會導致Hub位移 變得很不方便 所以設計這個固定架2.Macmini 底部散熱可能會影響 長時間高功率作業請考慮3.Orico Hub有一個很大的問題 風扇很吵 對於我只是擴充接口 沒有接SSD的人很困擾 建議可以從SSD底盤 看到風扇的一黑一紅排線直接拿剪刀進去剪掉 就不會再有噪音 當然之後如果加裝SSD會影響散熱但有購買的朋友應該會贊成 這個風扇真的太吵了 用這種廉價貨實在可惜 Orico M4 Mac mini Mount1. Plugging and unplugging USB devices often causes the hub to shift, which is very inconvenient. That’s why I designed this mount to secure it.2. The Mac mini’s bottom ventilation might be affected. Please consider this if you’re running high-power tasks for extended periods.3. The Orico Hub has a major issue—the fan is very noisy. For people like me who only use it to expand ports without installing an SSD, it’s quite bothersome.I recommend cutting the black and red fan wires directly from the SSD tray using scissors. This will completely eliminate the noise.
Kategorie
Electronics
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen