Slicer Discord
OSS Flying Dragon (RE-UPLOAD) – 3D printable model from MakerOnline MakerOnline
Hobby&DIY

OSS Flying Dragon (RE-UPLOAD)

250 Downloads
63 Likes
0 Makes
Go to Model
NOTE! The proper files are here: https://cults3d.com/en/3d-model/various/oss-flying-dragon Thingiverse admins deleted my previous upload without giving me a reason, I contacted them 3 weeks ago but they never responded, Do not print this file it is only a teaser ;) Gentlemen this is my version of the OSS Flying Dragon that uses cheap crosman parts to make, its a very cool Big Boy Toy lol After trying more than 6 calibers ranging from 25mm-10mm, 13mm gave me the best results Items Required: M3 screw & Nut 1" OD pipe (for Stock Can be Carbon or Aluminum) M5 Bolt X 40mm L (Dart Point) O-Ring (for Drats & Dart Pusher) Carbon Barrel: Pistol: https://www.ebay.co.uk/itm/OD-15mm-x-ID-13mm-x-Length-225mm-3K-Carbon-Fibre-Tube-For-Radio-Control-Model/142399982190?hash=item2127b34a6e:g:-VYAAOSwHMJYLXI~ Rifle: https://www.ebay.co.uk/itm/1-x-OD-15mm-x-ID-13mm-x-500mm-0-5-m-3k-Carbon-Fiber-Tube-Roll-Wrapped-Fibre/311998478453?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D1%26asc%3D20140122125356%26meid%3D0b07418739f44730b8fa9ad252b4600a%26pid%3D100005%26rk%3D4%26rkt%3D7%26sd%3D142399982190%26itm%3D311998478453&_trksid=p2047675.c100005.m1851 O-Rings: https://www.ebay.co.uk/itm/200pcs-8mm-x-2-4mm-Nitrile-Butadiene-Rubber-O-Ring-Oil-Sealing-Ring-Gasket-Black/362278808708?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 Main CO2 Tube: https://www.ebay.co.uk/itm/231970862683?var=531165727087 Grip Frame: https://www.ebay.co.uk/itm/Crosman-Grip-Frame-P1322-P1377-1322-1377-2240-2250-2250B-2400KT/330830227278?hash=item4d0704a74e:g:FcUAAOxywbNQ~Z1O !Don't forget to check out my other Cool designs and Follow my daily KooKoo uploads, Enjoy ;)
Category
Hobby&DIY
Source
MakerOnline
Published
What you need to print this: Intermediate Medium confidence
Why?
supports needed
Single piece Supports required Hardware needed
Supports 2/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
Polycarbonate
Min. bed size
50 mm (Small)
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
Same designer, more platforms

Dr.Mussy also publishes on

96 additional models across 1 more platforms

Verified by matching model titles across platforms.
Frequently Asked Questions
Which 3D printer is suitable for OSS Flying Dragon (RE-UPLOAD)?
Any FDM printer should handle OSS Flying Dragon (RE-UPLOAD) just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.
Does OSS Flying Dragon (RE-UPLOAD) need supports when printing?
Yes, OSS Flying Dragon (RE-UPLOAD) will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.
What file format is OSS Flying Dragon (RE-UPLOAD) available in?
OSS Flying Dragon (RE-UPLOAD) is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerOnline.
Is OSS Flying Dragon (RE-UPLOAD) free to download?
Yes, OSS Flying Dragon (RE-UPLOAD) is available as a free download through MakerOnline. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection