OSS Shifter Printable Tubes

I couldn't find the rods needed for this shifter in the US without waiting for china shipping so I made these alternatives in Fusion 360. They have threaded ends for m4 bolts to prevent them from snapping and enhance their strength. The 28mm rod uses 10mm M4 bolts and the 50mm rod uses 15mm M4 bolts.

The 10mm x 8mm file is 1mm tall so you can customize the height of the part by scaling it along the Z axis in your slicer. Increase scale by 100% for each MM of height you would like, for instance if you want the tube to be 96mm tall like the build requires scale it up on z axis to 9600%. If using cura you can just scale Z-height to 96mm or whatever desired.

All printed will need to be rotated 90 degrees to print vertically. I forgot to straighten them out when exporting.

Depending on printer you may need to adjust scale up or down to ensure good fitment, if too large/tight you can also sand the tubes.