Thingiverse
OSU! Mechanical Keyboard (Pro Micro)
by Aplyard
45
Downloads
35
Likes
0
Makes
A 2% Mechanical Keyboard, designed for the game OSU!.
Splited in 2 parts for easier printing. The supported board is a Pro Micro clone. Feel free to use a foamy 2-sided tape to keep it firm.
Can be used with the cable facing both ways, you just have to arrange the pins when you build the firmware.
Files for flashing QMK can be found in my [GitHub repo](https://github.com/Aplyard/Aplx2)
If you need any help flashing or building the firmware feel free to ask.
v2:
-added a hole for reaching GND & RESET pins if you want to reflash.
-added a fillet inside so you can pry off the Pro Micro if glued to the bottom.
Splited in 2 parts for easier printing. The supported board is a Pro Micro clone. Feel free to use a foamy 2-sided tape to keep it firm.
Can be used with the cable facing both ways, you just have to arrange the pins when you build the firmware.
Files for flashing QMK can be found in my [GitHub repo](https://github.com/Aplyard/Aplx2)
If you need any help flashing or building the firmware feel free to ask.
v2:
-added a hole for reaching GND & RESET pins if you want to reflash.
-added a fillet inside so you can pry off the Pro Micro if glued to the bottom.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
