Outlet Box Spacer - OLD WORK

I recently bought a house built in 1900.mf file Most of the outlets and switches needed to be replaced. I ran into the issue where the plaster was put on after installing the electrical junction boxes. I found many options available but nothing that held itself in place and was quickly adjustable. I designed these and have been using them and they work great.Quickly identify the length needed by holding them up to the box mounting point. Snap at the score with your fingers or pliers. slide onto your 8-32 screw and install. These are scored every 5mm and make a super simple adjustable option.Use these to bring the receptacle further out from the junction box if it is set in too far. They can snap together if you need to fill additional space. If not using .3mf file, follow the settings below: Print Settings:Material: PETGResolution: .20Walls: 5Infill: 100% GyroidSupports: Yes = RaftWall Generator must be set to ARACHNE