Slicer Discord
Oven Door Latch – 3D-printbaar model van Thingiverse Thingiverse

Oven Door Latch

16 Downloads
7 Likes
0 Makes
Model downloaden
This project came of necessity. One day I found my 15 month old granddaughter opening the oven door. The oven is a split design with the oven on the bottom and the grill (smaller oven) on top. It is built-in to the kitchen base units. The latch is installed on the lower edge of the top oven door with the slide piece sitting below the top of the main oven door. Rotating the top piece of the latch lifts the slide to allow the oven door to open. Releasing the top piece lets the slide drop back into its locked position. When the oven door is closed again the slide rides up over the top of the door and locks behind it. For times when the oven door is frequently opened and closed, rotating the top of the latch fully clockwise locks the slide in the released position. Future versions will have an interlock to prevent the child from turning the top of the latch fully clockwise without pressing a button on the side. The latch is stuck to the top oven door with strong double-sided tape
Bron
Thingiverse
Wat je nodig hebt om te printen: Beginner Lage betrouwbaarheid
Eendelig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie