Slicer Discord
Overengineered Knife/Scissors Sharpening Jig – 3D-Druckmodell von MakerWorld MakerWorld
Other Tools

Overengineered Knife/Scissors Sharpening Jig

181 Downloads
155 Likes
20 Makes
Zum Modell
GENERALSeveral design versions and printings scrapped and finally I have this knife/scissors sharpening jig. I wanted to design it to be as strong and precise as possible. So 3D printed threads and knobs were not an option. Therefore to adjust anything you need a 3 mm Allen key which is conveniently located on the jig itself. In the models and pdf the 3D printed parts are umber and bought parts are grey. It consists of two bases connected by two 8 mm rods. This allows the bases to change distance and the jig to sharpen smaller curves. To keep it from sliding there are holes on the bottom for rubber feet of diameter 10 mm or use those antislide rubber pads for phones cut in the shape. https://www.aliexpress.com/item/1005005710035199.html? In the STAND_1 is inserted another 8 mm rod which supports the rotational assemblies. These enable the sharpening stone to rotate freely in two axes and slide in another two. Besides these assemblies there is a stopper which restrains the rotational as
Kategorie
Other Tools
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

Bobino veröffentlicht auch auf

62 zusätzliche Modelle auf 2 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen