Overengineered Sample Card Box

Store and show off all your filaments in style. I made a box for my filament samples and was just having fun over engineering it. Here are the files in case you would like to make your own. I have two versions, one with dividers for up to 66 of these filament sample cards, the second version has no dividers for general use. The box has a top and bottom, each consisting of a core, and snap on cover. This way you can get multiple colors without an AMS. The catch prints separate, and then attached with m3 socket head screws, 16-20mm length work great. The screw holes can be plugged with the little disks, these should snap in to position and look like dowels, especially for the wood effect filaments. There are optional feet that can be glued on allowing the boxes to stack. The window can be filled with cut acrylic or a printed window, but for the sample cards, the window is not needed as the cards are held in place without it. Graphics for Acrylic WindowTo cut the window you can use the .D