Overkill Mousepads mount for Monstertech

Having a monstertech mount and low funds, I decided to design my own mousepad mounts. It is made to be rigid and quickly disassembled to be stored away. The assembly is made, for each side, from 4 parts :A T slot rail,A “fixer” which will be attached to the MT desk mount by squeezing the aluminium profileThe bracket, which slides into the previous part with a dovetail jointThe plate, which is screwed onto the bracketSeveral heat set inserts and corresponding screws.My first attempt required an addition gasket because the T slot rail/"fixer" assembly was not squeezing the extrusion hard enough. This has been modified and should not happen now. But I left it in cas you need it. Structural parts were printed in PLA, 4 walls, 20% infill.Plate and gasket were printed in PETG 15% infill with default slicer parameters.All parts were printed on Bambu Lab A1.I used M3 heat set insert and screws because That is what I had lying around, but feel free to use anything that fit your needs. f