Overlord Evileye

Filaments Used: PLA BambuLab Basic Black PLA BambuLab Basic Red PLA BambuLab Basic Yellow PLA BambuLab Basic Jade White Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #13 (1.12mm) swap to Yellow At layer #15 (1.28mm) swap to Jade White for the rest. The Model is 150x200mm in sizeYou can find the matching Hueforge frame here.https://makerworld.com/en/models/2306996-picture-frame-150x200mm#profileId-2556629 You need a different size:Remember, if scaling is desired, modify only the x and y axes; the z-axis must remain unchanged. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.84mm Boost MeDo you like my model?Then I would be incredibly grateful for your support in the form of a free Boost Token. And don't forget to follow me! Thank you so much! :)Gefällt dir mein Modell?Dann würde ich mich