Oversized Bulbasaur Card

Project: bulbasaur oversized card.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x278.6mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Cyan Transmission Distance: 3 PLA bambu green Transmission Distance: 1 PLA Bambu Matte icy blue Transmission Distance: 5 PLA Default yellow Transmission Distance: 5 PLA Default White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to Cyan At layer #14 (1.2mm) swap to Bambu green At layer #17 (1.44mm) swap to Icy blue At layer #19 (1.6mm) swap to yellow At layer #22 (1.84mm) swap to White for the rest.