Overture Spool Repurpose- Extra Life

Simple conversion to reuse the cardboard sides from Overture filament spools and attach them to a Bambu core. Same locking mechanism as the stock Bambu spools*, with threaded inserts to mount the cardboard sides. All parts equal 123g, compared to the stock printable spool at 218g for both halves. Designed and tested for the A1 spool holder- I don't know if it will work in any AMS systems or similar, as I have none to test. Simply remove the cardboard sides from the Overture spool, (using a knife or chisel seems to work best) then mount the cardboard to one of the halves with a male threaded insert. This is designed as a snug fit- you may need to run the threaded piece in and out a few times to make sure it's moving smoothly and not catching on any seams. Should not need any tools. It holds tightly on it's own, but a drop or two of super glue can be used if thought to be needed. I also take this time to inspect the cardboard edges, and run a bead of glue along any fraying or