Owl II

ou can only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! The layers would not be correct. The Model is 150x150mm in size.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmYou may print at higher layer heights below the Base Thickness of 0.56mm.The Max allowed Thickness is 2.08mm and the Actual Thickness is 2.08mm.Filaments Used:PLA ****** + Black Transmission Distance: 0.3PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA ****** Basic White Transmission Distance: 7This print uses 3 unique filamentsSwap Instructions:Start with BlackAt layer #9 (0.8mm) swap to Blue GrayAt layer #14 (1.2mm) swap to White for the rest.