Owl III

Filaments Used:- PLA BambuLab Basic Black - PLA BambuLab Basic Blue - PLA BambuLab Basic Magenta - PLA BambuLab Basic Jade White - PLA BambuLab Basic Yellow Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #14 (1.2mm) swap to Magenta At layer #18 (1.52mm) swap to Jade White At layer #28 (2.32mm) swap to Yellow for the rest. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 166.67x250mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 3.2mm and the Actual Thickness is 2.72mm Remember, if scaling is desired, modify only the x and y axes; the z-axis must remain unchanged. Boost MeDo you like my model?Then I would be very grateful for your support with a free boost token. Thank you very muchGefällt Ihnen mein Modell?Dann würde ich mich über eine Unterstützung mit einem kostenlosen Boost-Token sehr freuen. Vielen Dank