Ozzy Tribute 4

Another Hue forge tribute for Ozzy that I was asked to create.The upload is a bit different from the picture as I wasn't happy with he final result of the first adaptation. The second one is printing now and I may not be able to finish with a picture before the long weekend so trying to get uploaded so that the person who wanted it can get it done. This one take six colors.. so if you only have one AMS you must use the same slot for Black & Yellow & as well for Blue-Gray & Silver.Basically when slicing change back to those colors in the slicing software & when your done with the black layers just take out the black roll and pop in the yellow. Do the same with Blue-Gray.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA BambuLab Basic Black PLA BambuLab Basic Blue Gray PLA BambuLab Basic