P2020 3D Printer

This is my big P2020 3D printer. It took about 3 months to build in my spare time.I already have an M3D (terrible printer) and a chinese i3 clone. I wanted a printer with the rigidity of the M3D and print quality better than the i3 and at a larger print volume. So i modeled the design after a mix between the CR-10 and the Lulzbot Taz 6.Here is a video of it printing. https://youtu.be/w-Ai7Jbp3DQThe printer Specs are as follows:640mm wide450mm tall440mm deep300x300x300mm build volume12V 30A DC power supplyexternal heater module (for the bed)E3D V6 hot endNoctua fansGeeetech GT256010x20mm drag chainssilicone jacketed wire where it counts2020 80/20 extrusion frame (i dont recommend 80/20 t-slot, too narrow of an opening)2020 v-slot extrusion (x and z axis) with mini v-slot wheels and plates2060 v-slot extrusion (y axis) with normal large sized wheels and a universal plateand tons of hardware!I had no idea it would be so heavy, but it is quite solid. I can print with it on its side! I can