Slicer Discord
P2S Dial Indicator mount (tramming tool) – 3D-printbaar model van MakerWorld MakerWorld
3D Printer Accessories

P2S Dial Indicator mount (tramming tool)

626 Downloads
255 Likes
462 Makes
Model downloaden
Here is a holder bracket you can use to install a dial indicator / dial gauge on the toolhead of your P2S.I use it to do the bed tramming calibration of the build plate, the indicator helps to have a direct reading which is more practical/precise than the sheet of paper that Bambu use on their tutorial : https://wiki.bambulab.com/en/p2s/maintenance/manual-bed-tramming I do not use the gcode proposed by Bambu, I prefer to manually tram the toolhead all around the plate The bracket slides into the toolhead, no need to remove the anything except the front cover of course, the nozzle can stay in place : You will need :2× M4 screws (M4-16 is perfect, maximum length is 20mm) 2× M4 nuts1× Dial Indicator with a 8mm or a 9.52mm shank, up to 60/61mm of diameter (mine is dia8mm and has 12.7mm of range)Material : use the stiffest material you have (PLA, PLA-CF, PETG-CF, ABS-GF or ASA-CF for exemple are perfect for this kind of part) There is not mechanical “lock” as I wanted to prevent any damage
Categorie
3D Printer Accessories
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Eendelig Hardware nodig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 1/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA, ABS, PETG
Nabewerking
Hardware
Software
Cura, PrusaSlicer of vergelijkbaar
Zelfde ontwerper, meer platforms

dedge publiceert ook op

3 extra modellen op 1 andere platforms

Geverifieerd door overeenkomende modeltitels op platforms.
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

1 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie