P2S Smoothy Y-Splitter Mount

On the P2S the PTFE coupler on the rear panel has been moved to the edge of the frame, meaning the existing magnet mounting solutions for the smoothy (or any) Y-splitter no longer work. I found this put the PTFE tubing and filament path under some tension, particularly when pulling filament from a dry box through the 2nd channel, so I designed this little 10g bracket and mounting clip to try and support it. I'd consider this a solid first version but as I use this long term i'm sure there i'll find things to tweak so i'd be open to any feedback. I tried to make it as slim as possible but i think to make it significantly more secure it may need to be thicker to brace against the printer better, or perhaps incorporate groove for double-sided tape. I did play with angling the mount differently, to make it come out flatter, or to angle it more and shorten the feed path, but this didn't alleviate the strain on the tubing as much as I wanted and it would pull the mount away from the printer