P2S & X2D Riser With LED & Exhaust Features

Updated : Fixed shutter mismatch and correct thickness sizes This P2S riser is designed for better ventilation and comes packed with useful features, including an LED light slot, a cable-management channel, and an optional exhaust-fan mount. Exhaust Fan (Optional) There are two exhaust fan configurations: Indoor Venting Includes slots to install two 80×40 HEPA filters for improving air quality inside the room. Outdoor Venting Designed with a port that allows you to connect external pipes. It supports 50 mm PVC pipes or 62 mm pipes. If your pipe diameter is different, I also uploaded the STEP file, so you can adjust the model to your needs. Printing Requirements For a basic setup, you’ll need less than 1 kg of filament to print all parts. I'd recommend PETG or ABS If you also want to install the LED strip, I recommend using a 24 V LED strip, since the P2S has a 24 V output port. You can either crimp your own cable or buy one pre-crimped. Optional Switch & Fans You can add an on/off swit