Slicer Discord
P4 or P5 LED Matrix Panel Interconnect  – 3D-Druckmodell von Thingiverse Thingiverse

P4 or P5 LED Matrix Panel Interconnect

1 Downloads
0 Likes
0 Makes
Zum Modell
The other designs are too big and take 3 hours to print so I designed smaller ones that print in 1 hour. Use 50% infill to make them solid. The hole spacing is 16mm. The 30mm design can be used for edges. The 40mm design is what I am using. I actually buy 3/4" x 3/4" aluminum angle at the hardware store and drill holes in that for the outside edges. I have tried printing edges but they break too easily.
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Ca. Druckzeit
3 h
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen