Pac Wars

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150.01x130.65mm in sizeYou may print at higher layer heights below the Min Depth of 0.88mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA PolyLite Grey Transmission Distance: 1 PLA BambuLab Basic Yellow Transmission Distance: 5.9 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filaments Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Blue At layer #17 (1.44mm) swap to Grey At layer #23 (1.92mm) swap to Yellow At layer #25 (2.08mm) swap to Jade White for the rest.