Pachinko Ball Lifter

***NEW DESIGN 4/5/2025***

Printed Parts:

- Print Top, Center, Bottom and Legs in any material with at least 30% infill and 2 wall loops (PETG or ABS Preferred) Support may be needed for bottom plate.
- Print Gear and Gear Top in ABS or PETG with 3 wall loops and 50% or higher infill (Supports needed for gear, interface distance of 0.6 works well).

Bill of materials:

1x 1/8" x 12" Metal Rod (CUT DOWN to 4" Long) Home Depot, Ace) or https://www.amazon.com/dp/B0CY4DWJFQ
4x #8 x 4.5" Wood Screws (Attach to base and hold layer together) (Lowe's, Home Depot, Ace Hardware or similar)
4x M4 x 8mm Countersink Machine Screw (Home Depot) or https://www.amazon.com/dp/B07D5W1WDT
4x M4 x 12mm Socket Head Screws (Home Depot) or https://www.amazon.com/dp/B0DCVVSGW2
4x M4 Heat Set Inserts https://www.amazon.com/dp/B0CTCSJ7Y8
1x 1/2" PEX Pipe 5ft (Home Depot or similar) - Cheapest Option
2x 1/2" PEX Bend Support (Home Depot) or https://www.amazon.com/dp/B00A8J1D18
1x 12V 2A Power Supp