Pack 4 Bookmarks Samurai, hueforge

set of 4 Samurai bookmarks, with and without a hole, choose yours or print all 4   Project: bookmarks samurai .hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 53.33x159.99mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA smartfil black Transmission Distance: 0.4 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Beige Transmission Distance: 8 PLA smatfil White Transmission Distance: 6 This print uses 4 unique filaments Swap Instructions: Start with black At layer #15 (1.28mm) swap to Red At layer #18 (1.52mm) swap to Beige At layer #23 (1.92mm) swap to White for the rest.