Paddle

Mod 1 Update:

A handful of people said they had problems with it breaking where the handle joins, and I realized I had sharp corners there, a perfect point for stress. I filleted the joint that sticks out of the head to reduce the stress, and I increased the overall thickness of the paddle from .400" to .550". The hole in the handle was increased to .40" dia to accommodate either 3/8" or 10mm studs/hooks.

For this version you will need to use four M4x10mm bolts. You could use a mod 0 handle with the mod 1 head or vice versa, since the holes align the same, but the M4x10mm screws will stick out of it then.

Also added a blank head, for anyone who wanted to more easily customize their own, as well as a lower resolution (triangle size) head with holes (8mb instead of 87mb). I'll leave the old files in case anyone still needs them.



Original Description:

Here's a paddle I've designed that has two heads you can use, either a traditional one with holes, or one that has s