Panda II.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. It is possible to print without masterial system by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support. The Model is 150x150mm in size. You can only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! (You can download 200x200 mm size stl., settings is same.) The layers would not be correct. ou may print at higher layer heights below the Base Thickness of 0.48mm. The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm. Filaments Used: PLA ******** Black Transmission Distance: 0.3PLA Sunlu Meta Grey Transmission Distance: 3.5PLA ****** Basic White Transmission Distance: 7This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to GreyAt layer #14 (1.2mm) swap to White for the rest.