Panda II. HueForge

Picture source/author: Kathryn Diane Nicholson BoothThen used HueForge v0.9.3 to create the model. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.I made two version size model/profile, the first is 200x200 and the second for A1Mini 150x150. The color change settings are identical. Do not adjust the height (Z) in your slicer! The layers would not be correct. You can only modify the X and Y dimensions. You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 2.24mm and the Actual Depth is 2.24mm. It is possible to print without AMS by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support. Filaments Used:PLA Anycubic Black Transmission Distance: 0.3PLA Sunlu Meta Grey Transmission Distance: 3.5PLA Elegoo Basic White Transmission Distance: 7This print uses 3 unique filamentsSwap Instructions:Start with BlackAt layer #9 (0.8mm) swap to GreyAt layer #14 (1.2mm) swa