Panda Knomi - P2S Screen Mount Bracket

I designed this screen mount so you can use a Panda Knomi with your P2S printer. The Knomi is placed in the indentation on the right side of the screen mounted bracket and the retaining clip swivels into place to keep it secure. You will most likely need a 90 degree USB C cable to use with the screen as it's a tight fit with a standard USB cable coming straight out the back and you won't be able to pivot the P2S screen. Using a 90 degree cable allows the P2S screen to move freely as it was designed. You can power the Knomi from the front USB port on your P2S. The model displayed was printed in Sunlu Grey PLA+. You can purchase a Panda Knomi on Amazon: https://amzn.to/4s3ohpr I used a FORIDA 3 Ports USB Adapter to split the top USB connection to allow me to use my USB thumb drive and power the Knomi. You can purchase one on Amazon: https://amzn.to/3PnLYuB I used a Short USB A to USB C Cable Right Angle 1ft to connect the Knomi to the top USB port. You can purchase these on Amazo