Paper roll holder

####Intent

My girlfriend wanted a "thing" to hold the paper roll in the kitchen and since I have a printer she asked if I could "make something" - Sure!

####Obstacles

Because I wanted the construction to be heavy I figured I wanted it filled with something.
So I had to make it hollow and I also wanted a way to prevent the roll from coming off.
Another thought was that I wanted it to be printed without any support due to the the design.

####Measurements

See "Paper roll holder blueprint.pdf"

####Parts List

* Top knob.stl
* Threaded joint.stl
* Lid with threaded shaft.stl
* Bottom.stl

####Required Hardware

* [9 x M2.5x10 mm countersunk Phillips self tapping screws](https://hobbyking.com/en_us/metal-flat-head-self-tapping-sharp-tail-phillip-screw-m2-5x10-10pcs-set.html)
* [1 x M4x30 screw (from 25 to 35 mm is OK)](https://hobbyking.com/en_us/metal-round-head-machine-hex-screw-m4x36-10pcs-set.html)
* [Sand or other heavy material](https://www.xpatathens.com