Thingiverse
PARALLEL JAW OFFSET GRIPPER
door 3DPRINTINGWORLD
122
Downloads
96
Likes
0
Makes
PARALLEL JAW OFFSET GRIPPER
Two gear racks and a pinion open and close the gripper jaws by rotating a handle connected to the pinion. 180 degrees of rotation opens the grippers 1.5".
Required Fasteners:
To assembly the gripper base.
(2X) M3 x 10mm Lg. Socket Head Cap Screws
(2X)- M3 Hex Nuts
To mount the tooling to the gear racksracks. (optional)
(4X) M3 x 10mm Lg. Socket Head Cap Screws
(4X)- M3 Hex Nuts
Note: A set of gripper tooling is provided but additional tooling made for your application can be mounted utilizing the M3 mounting nuts inserted into the gear racks.
The updated version will operate with a stand hobby servo.
https://youtu.be/JKqmfnDTNHs
https://youtu.be/rYZrzM7dyo4
Two gear racks and a pinion open and close the gripper jaws by rotating a handle connected to the pinion. 180 degrees of rotation opens the grippers 1.5".
Required Fasteners:
To assembly the gripper base.
(2X) M3 x 10mm Lg. Socket Head Cap Screws
(2X)- M3 Hex Nuts
To mount the tooling to the gear racksracks. (optional)
(4X) M3 x 10mm Lg. Socket Head Cap Screws
(4X)- M3 Hex Nuts
Note: A set of gripper tooling is provided but additional tooling made for your application can be mounted utilizing the M3 mounting nuts inserted into the gear racks.
The updated version will operate with a stand hobby servo.
https://youtu.be/JKqmfnDTNHs
https://youtu.be/rYZrzM7dyo4
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
