Paramedic Brick Man

Introducing the Paramedic Brick Man! Approximate size when printed is 20cm / 8 inches. I recommend Glow for the reflective parts on the suit. Want to change the uniform colour , change filament #7, this will change only the colour of the uniform. Printing Details and directions:Logo Print recommendation is .20mm with ARACHNE wall generator.- logo's are better printed with a .2 nozzle with ARACHNE wall generator.All other parts can be printed at .20mm with CLASSIC wall generator. Supports are only required for the ARMs (plate 2) and HIP (plate 3).Depending on your setting and adhesion level I would recommend a brim on the hands and arms. You will need to glue the logo into place after printing it was designed this way to try to have as little poop waste as possible.