Thingiverse

Parameterized NFT Garden PVC Pipe Cap

von jay408

283 Downloads

171 Likes

1 Makes

UPDATE 6/17/2020 - Added a 4 inch version by request as well as copied the original to specify it as a 2 inch version.

UPDATE 3/18/2020 - Suggest printing upright to minimize support markings. Also recommend using a brim in this configuration. Otherwise the side edges are prone to coming loose during the print.

I recently took up an interest in indoor gardening. My kids and I built an NFT indoor garden out of 2" PVC pipe. Shortly after we got it running, I discovered a mosquito the size of a small hummingbird sitting in one of the unused holes having a drink!

I decided to create some caps for the holes. I did see gutter versions for NFT gardens such as https://www.thingiverse.com/thing:1688178, but nothing for PVC pipes. I designed this simple cap to fit snuggly in the holes while minimizing the footprint on the garden.

As uploaded, this design will work with standard 2" PVC pipes using 2" holes for 2" net pots. However, it's parameterizable, and should

cap DIY hydroponics gardening hole plug hydroponic hydroponics indoor garden indoor gardening NFT parametric pvc pvc pipe cap DIY hydroponics gardening hole plug hydroponic hydroponics indoor garden indoor gardening NFT parametric pvc pvc pipe

Quelle

Thingiverse

Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz

Einteilig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 0/3

Drucker

FDM / FFF

Dateiformat