Parametric Clamp Stand

This is a Parametric Clamp Stand for holding Dspiae DIY MPC-20 and similar Painting Clip Sticks. In the original design the outer diameter is 150 mm (parametric) with 20 holes for the painting sticks (also parametric). The center hub has 6 holes angled out at 40 degrees (not parametric). The hole size is set for 2 mm from the start, but this too is parametric, and I have made the holes 0.2 mm undersized (due to the cross-pattern design). If you are unsure about the fit, I recommend printing the Test Part (which is only included in the parametric file and not in the 3MU, STL, or STP). If you want to change the outer diameter, I recommend lowering the amount of exterior holes first, as you may otherwise crash the model (sorry my parametric skills are only so good.