Thingiverse

Parametric D Cell Battery Holder

door Radagaz

12 Downloads

13 Likes

0 Makes

A parametric D cell battery holder. Something I needed for many of my projects, but I couldn't find any other super functional printable ones. Uses fairly inexpensive contacts available at digikey that keep a very solid electrical connection.

Designed to work with these contacts from Keystone Electronics:

[CONTACT BATTERY D NEGATIVE COIL](https://www.digikey.com/product-detail/en/keystone-electronics/5251/36-5251-ND/2745884)
[CONTACT BATT D POSITIVE BUTTON](https://www.digikey.com/product-detail/en/keystone-electronics/5250/36-5250-ND/2745883)
[CONTACT BATTERY D DUAL](https://www.digikey.com/product-detail/en/keystone-electronics/5252/36-5252-ND/2745885)
[DUAL D CELL BATTERY CONTACT (L)](https://www.digikey.com/product-detail/en/keystone-electronics/5253/36-5253-ND/4499310)

You will probably need all 4 depending on size battery holder you make.

Use two [#4 1/2 inch pan head screws](https://smile.amazon.com/Screws-Phillips-Stainless-Self-Tapping-Quantity/dp/B01CEZT0R2/re

battery batteryholder batterypack battery box battery case battery holder battery pack D batteries D battery D battery Box D Battery Holder openscad parametric battery batteryholder batterypack battery box battery case battery holder battery pack D batteries D battery D battery Box D Battery Holder openscad parametric

Bron

Thingiverse

Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid

Eendelig Hardware nodig

Supports 1/3

Montage 0/3

Instellingen 1/3

Bedgrootte 0/3

Nabewerking 1/3

Printer

FDM / FFF

Bestandsformaat